Customization: | Available |
---|---|
Type: | Reaction Kettle |
Material: | Glass-Lined |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Internal Vessel | Jacket | |
Design Pressure (MPa) |
0.4/0.6/1.0 | 0.6 |
Design Temperature ( ºC ) |
-19 ºC /200ºC | -19 ºC /200ºC |
Symbol | Usage |
a | Manhole |
b | Agitator Hole |
c | Thermowell |
d, f, g, h | Spare |
e | Sightglass |
j | Medium Outlet |
k1, k2, k3 | In/Outlet |
n1, n2, n3 | Spray Nozzle |
m | Vent Hole |
Unit: mm | |||||||
Specifications | F1500 | F2000 | F3000 | F4000 | F5000 | F6300 | |
Nominal Capacity (L) | 1500 | 2000 | 3000 | 4000 | 5000 | 6300 | |
Total Capacity (L) | 2020 | 2470 | 3860 | 4795 | 6040 | 6900 | |
Calculated Capacity(Notes 1) (L) | 1990 | 2440 | 3830 | 4795 | 6016 | 6872 | |
Jacket Capacity (L) | 301 | 390 | 495 | 805 | 898 | 1015 | |
Heat Exchange Area ( m2 ) | 5.92 | 7.31 | 9.98 | 12.44 | 14.06 | 16.36 | |
Reference Weight (kg) | 2120 | 2380 | 3360 | 3905 | 4720 | 5200 | |
Main Dimensions |
d1 | 1300 | 1300 | 1600 | 1600 | 1750 | 1750 |
d2 | 1450 | 1450 | 1750 | 1750 | 1900 | 1900 | |
d3(Notes 2) | 1622 | 1622 | 1964 | 1964 | 2152 | 2152 | |
d4 | 680 | 680 | 720 | 720 | 720 | 720 | |
d5 | 700 | 700 | 800 | 800 | 850 | 850 | |
h1 | 1801 | 2136 | 2250 | 2730 | 2888 | 3244 | |
h2 | 190 | 190 | 190 | 190 | 190 | 190 | |
h3 | 725 | 725 | 700 | 700 | 750 | 750 | |
h4 | 975 | 975 | 1060 | 1060 | 1200 | 1200 | |
B1 | 315 | 315 | 315 | 315 | 350 | 350 | |
B2 | 510 | 510 | 510 | 510 | 510 | 510 | |
Φ | 30 | 30 | 30 | 30 | 30 | 30 | |
Nozzle DN | a | 300×400 | 300×400 | 300×400 | 300×400 | 300×400 | 300×400 |
b | 125 | 125 | 150 | 150 | 150 | 150 | |
c | 100 | 100 | 100 | 100 | 125 | 125 | |
d | 100 | 100 | 100 | 100 | 125 | 125 | |
e | 125 | 125 | 125 | 125 | 125 | 125 | |
f | 125 | 125 | 125 | 125 | 150 | 150 | |
g | 100 | 100 | 100 | 100 | 125 | 125 | |
h | 125 | 125 | 125 | 125 | 150 | 150 | |
j | 100 | 100 | 125 | 125 | 125 | 125 | |
Jacket Nozzle DN |
k1 | 40 | 40 | 65 | 65 | 65 | 65 |
k2 | 40 | 40 | 65 | 65 | 65 | 65 | |
k3 | 40 | 40 | 65 | 65 | 65 | 65 | |
n1 | 50 | 50 | 65 | 65 | 65 | 65 | |
n2 | / | / | / | 65 | 65 | 65 | |
n3 | 50 | 50 | 65 | 65 | 65 | 65 | |
m | G3/8" | G3/8" | G3/8" | G3/8" | G3/8" | G3/8" | |
Drive | DN | 80 | 80 | 95 | 95 | 95 | 95 |
h5 | 1320 | 1320 | 1360 | 1360 | 1360 | 1530 | |
Notes 1: Calculated Capacity: Volume under highneck flange. | |||||||
Notes 2: Types of support depend on users; if there is no special request, lugs would be normally applied. |